2″ Long Wide Handle Ratchet – White Zinc
When a standard ratchet handle isn’t giving you enough leverage, this 2″ Long Wide Handle Ratchet is built to close the gap. It carries a working load limit of 3,666 lbs. and an assembly break strength of 11,000 lbs., making it a solid choice for heavy-duty cargo securement.
The extended, wider handle gives you more leverage with every stroke, so you can tension 2″ webbing tight without leaning your full body weight into it. A white zinc plated finish helps resist rust and corrosion from road salt, rain, and everyday exposure.
Features
- Long, Wide Handle: A 3.94″ wide handle gives you more leverage and less effort when tensioning 2″ webbing.
- White Zinc Plated Finish: Helps resist rust, road salt, and weather.
- 3,666 lbs. Working Load Limit: Backed by an 11,000 lbs. assembly break strength.
- Fits 2″ Webbing: A 2.05″ frame is sized for standard 2″ tie-down straps.
Building your own tie-downs? Pair this ratchet with 2″ webbing from our full webbing selection, then finish the assembly with flat hooks and snap hooks or wire, grab, and S-hooks to match your anchor points.
Ratchet Use Guidelines
According to the WSTDA (section 4.6.8): “When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation.”
